Temperature/Humidity Sensor (Probe)

Temperature/Humidity Sensor (Probe)

The X-DTHS-P can be used to monitor temperature and/or humidity in real-time using the X-400 Series modules with a 1-Wire Bus (X-410, X-420, etc.), and WebRelay-Wireless modules only.

The X-DTHS-P comes with two mounting options:
1. Mounting Clip – For ease of mounting against a surface.
2. Thru-Wall Mounting Bracket – For HVAC duct monitoring. The bracket has a foam gasket to seal the access hole.

The sensor can be installed outdoors but must be protected from the elements. Install the sensor in a protected location away from rain or direct sunlight.

No additional software, or power supply required. Simply connect and set up on any of our compatible products.


Quantity:


Temperature Sensor Wiring

The sensor has three wires which are connected to a compatible ControlByWeb device. The cable can be extended with additional wire if needed (600ft max).

Compatible Products

• X-400
• X-410
• X-420
• WebRelay Wireless

• Temperature Range: -40°C to 80°C (-40°F to 180°F)
• Temperature Accuracy: ±0.4°C (typ 0°C to 80°C)
• Humidity Range: 0-100% RH
o (Not suitable for environments with reoccurring or prolonged condensation)
• Humidity Accuracy: ±2%
• Type: Dallas Semiconductor DS18B20
• Lead Length: 10ft (3.04m)
• Probe Length: 3.92in (99.6mm)


YOU MAY ALSO LIKE